Configure Kiosk Pro Lite

After downloading and opening the app:

1. Go to the Homepage section

2. Enter the URL for your kiosk (ex:

3. Select Show Settings on Touch Gesture & Pass Code

a. Gesture = Touching 4 corners of the screen simultaneously then releasing to open pin pad pop-up

4. ADMIN – Enter Passcode 4 digit string to prevent seeing settings/url on launch


5. Go to Display and Make sure everything is turned OFF


6. Go to Content Refresh - Idle Time Limit – Set with nothing entered (blank it out)


7. Click the "Run Kiosk Presentation" button up top to launch your digital kiosk


Note: The basic Kiosk Pro Lite settings above allow access to the Home Page of the tablet by clicking the Home button. To Prevent this, and disallow access to the Home Page enable Guided Access. 

Enable Guided Access

Follow the instructions below to protect the kiosk URL with a pin and prevent access to the tablet's Home Page.

Note: on iPad v4, the Kiosk Pro Lite Show iPad Status Bar option must be disabled in order for Guided Access to function properly  

After configuring Kiosk Pro Lite:

1. Click the Home Button > Go to iPad Settings > General Tab


2. Click Accessibility > Guided Access


3. Turn Guided Access ON

4. Click Passcode Settings


5. Click Guided Access Passcode and set the passcode > Guided Access is now ready to Activate on Kiosk Pro Lite


Note: on iPad Air or iPads running iOS12+, there's another option called Mirror Display Auto-Lock that you would have to toggle ON.


6. Click the Home button > Click the Kiosk Pro Lite icon and make sure that the kiosk is displaying

7. Press the Home button three (3) times and the Guided Access Options should display

8. Click the Hardware or Options buttons and choose which options to allow


11. Click Start to lock Kiosk Pro Lite in Guided Access mode.